EuroFlex Quote

Closure / Register Plate Type

The closure/register plate is designed to seal off the structural opening and flue itself to conceal the liner system within the masonry flue as per building regulations. Using these pre-made components creates a neater finish and supports the overall installation. You can choose a blank plate or a version with three pre-cut holes depending on your stove pipe and inspection access requirements and locations. The Holes have a reducer plate to take from 6”down to 5” as required. There are other sizes and options available alongside we can bespoke make to size if required at additional cost. They all include suitable angle iron to cut to size for installation.

Available options:(Retail Prices incl VAT)

None - £0.00 incl VAT

With 3 Holes (Two Inspection Plates and Fluepipe) - Incl Angles - £53.78 incl VAT

Without Holes (Blank Plate) - Incl Angles - £49.50 incl VAT

Flex to Single Wall Adapter Options

Flexible Liner to Single Wall Flue pipe adapters are used to connect different parts of the flue system where the liner and stove pipe sizes need to match correctly. Selecting the right adapter helps ensure a secure and suitable transition between components. We can offer other adapters for other situations and installations such as Pre-Fabricated Flues (Twin Wall) or Sump Adapters and Gather units.

Available options:

None - £0.00 incl VAT

5" - 6" Flex SW Adapter - £21.34 incl VAT

5" - 5" Flex SW Adapter - £11.57 incl VAT

Vitreous Enamel Single Wall Flue Pipes

Vitreous Enamel Smooth 1.2mm - 1.4mm Low Carbon Mild Steel Flue pipe sections are used to connect the appliance to the rest of the chimney system and appliance itself. Different lengths or multiples are available depending on the installation setup and the distance required between components. We can also offer additional: offsets, bends, Tee Pieces and other components as required or needed for your installation. We can assist and advise as required.

Available options:

None - £0.00 incl VAT

250mm - £12.70 incl VAT

500mm - £18.95 incl VAT

1000mm - £29.09 incl VAT

Additional Components

These optional extras can help support, secure or complete the liner installation and aid in backfilling the masonry flue. Depending on your setup, you may need a star clamp or liner clamp and sleeve kit as a support component to suit the appliance and chimney arrangement and requirement. For further details please view the products individually within the shop section of the website. We can also assist and advise further as required.

Available options:

None - £0.00 incl VAT

Star Clamp - Only - £12.56 incl VAT

Liner Clamp - Clamshell (Incl Sleeve Kit) - £61.92 incl VAT