Case Study – Leeds Stove Centre

SHARE

Share on facebook
Share on google
Share on twitter
Share on linkedin

Case Study – Supplied by Leeds Stove Centre

It’s nice to receive positive feedback and testimonials as we mentioned here. When a customer goes out of their way to tell you why they believe in your product it’s even better.

Leeds Stoves Centre had an issue, and this is their story as to why they are sold on the Mini Eurocowl.

 

The Scenario

Their customer had a Contura 810 with a twin wall system with its own original cowl. The set up had two 45 degree bends to miss the roof hip on a single storey extension. Due to stability issues only a 2.5m flue was possible on the outside. The stove is very efficient and requires a good chimney to work as on occasions it can have a tendency to blow back unless the draw is very strong.

The customer was indeed complaining about smoke re-entering the room every time it was lit. This was therefore giving them the issue of an unhappy customer and a situation they didn’t want to have to repeat again.

The Solution

The answer was to install a stainless steel Mini Eurocowl. As the stove was connected to a twin wall system they also required a twin wall adaptor. With products in hand they were slid the cowl on top of the twin wall and secure with ease. This immediately reduced any direct downdrafts, allowed the fire to get started and sufficient draw was maintained.

Thanks to Craig from the Leeds Stove Centre and his installers for sharing their issues and supplying the images for us to use.